FSR-216F-POE is part of the FortiSwitch portfolio for industrial and harsh environments, with standalone management or management integrated through FortiLink, depending on the chosen architecture.
Key features
Industrial and harsh environmentsIntended use according to the official FortiSwitch family.
FortiLinkManagement integrated with FortiGate when included in the design.
Secure NetworkingNetworking and security addressed within a coordinated architecture.
Technical specifications
Interfaces
Access ports
16 × RJ45 1 GbE and 100/10 Mb/s
Uplinks
4 × SFP/SFP+ 1/10 GbE
Dedicated management port
1 × management RJ45 Ethernet port
Console
1 × RJ45 serial
Industrial alarms
Digital input/output (I/O) connector
Power and PoE
PoE ports and standards
16 × IEEE 802.3af/at/bt; up to 90 W per port
Total PoE budget
360 W
Power input
Without PoE: ±12 to ±57 V DC; 802.3af: ±44 to ±57 V DC; 802.3at: ±50 to ±57 V DC; 802.3bt: ±52 to ±57 V DC
Power redundancy
Redundant DC input terminals
Power consumption
35 W without PoE; 396 W with PoE (maximum)
Thermal derating of the PoE budget
Up to 240 W PoE at 75 °C; up to 360 W PoE at 60 °C
Reverse polarity protection
Yes
Power terminals
DC terminal block without support for energised connection/disconnection (hot-plug)
Performance and capacity
Switching capacity
112 GbpsDuplex value published in the datasheet; the detailed measurement methodology is not stated.
Forwarding rate
166 MppsDuplex value published in the datasheet; the detailed measurement methodology is not stated.
Network latency
< 1 µsDatasheet value; packet and load conditions not specified.
MAC address table
16K
Supported VLANs
4K
Ports per aggregation group
8
Link aggregation groups
Up to the number of ports
Packet buffer
1,5 MB
RAM
1 GB DDR4
Flash storage
32 MB SPI + 1 GB NAND
ACLs
2K
Spanning Tree instances
32
Installation and environment
Form factor and installation
DIN rail mounting
Dimensions (H × D × W)
180 × 170 × 116.4 mm
Weight
3.0 kg
Heat dissipation
119.42 BTU/h without PoE; 1,353 BTU/h with PoE
Operating temperature
−40 to 75 °C; cold start at −40 °C
Storage temperature
−40 to 85 °C
Relative humidity
5% to 95%, non-condensing
Noise / cooling
Fanless, passive cooling
MTBF
Mais de 30 anos
Ingress protection rating
IP40
Operating altitude
Up to 3,000 m between −40 and 55 °C; up to 2,000 m between −40 and 75 °C
Mechanical tests
IEC 60068-2-6 vibration and IEC 60068-2-27 shock tests
Interconnection and PoE safety
Use the SFP ports to interconnect switches; follow the manufacturer’s restrictions before connecting non-PD devices to PoE ports
Management and security
Management
Standalone mode or management integrated with FortiGate through FortiLink
FortiLink Stacking
Automatic interconnections between switches in the FortiLink topology
Documentation
Document reference
27/08/2026 (DD/MM/YYYY) · FSR-DAT-R36-20260827
Figures published by the manufacturer. Final sizing depends on the environment, enabled services and traffic profile.
