Fortinet · Wireless
FortiAP 23JF
Wi-Fi 6 2×2 with internal antennas, for wall-jack / desktop installation.
Overview
FAP-23JF is part of the FortiAP range for corporate Wi-Fi 6 connectivity, with management and security assessed in the context of the Fortinet architecture.
Key features
- Wi-Fi 6Wi-Fi 6 radio technology according to the official model datasheet.
- Wall jack / desktopPhysical form factor suited to the stated installation context.
- Integrated managementControl through FortiGate, FortiSASE or FortiEdge Cloud depending on compatibility and design.
Technical specifications
| Wi-Fi generation | Wi-Fi 6 (IEEE 802.11ax)Value declared by the manufacturer; applicable configuration and regulatory domain. |
|---|---|
| Radios | 3 Wi-Fi radios + 1 BLE radioValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Radio 1 — band and MIMO | 2.4 GHz; 2x2 MU-MIMO; 2 spatial streams; 20/40 MHzValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Radio 2 — band and MIMO | 5 GHz; 2x2 MU-MIMO; 2 spatial streams; 20/40/80 MHzValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Radio 3 — monitoring | 2.4/5 GHz; 1x1; frequency scanningValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Maximum PHY rate — radio 1 | 574 MbpsTheoretical PHY maximum; depends on client, channel width, signal and regulations. |
| Maximum PHY rate — radio 2 | 1.200 MbpsTheoretical PHY maximum; depends on client, channel width, signal and regulations. |
| Modulation | BPSK, QPSK and 64/256/1024-QAM on service radiosValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Frequency ranges | 2.400–2.4835; 5.150–5.250; 5.250–5.350; 5.470–5.725; 5.725–5.850 GHzValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Conducted TX power — 2.4 GHz | Up to 25 dBm, combining 2 chainsThe source table contains an inconsistent dBm/mW conversion; only the declared dBm value is used. |
| Conducted TX power — 5 GHz | Up to 21 dBm, combining 2 chainsThe source table contains an inconsistent dBm/mW conversion; only the declared dBm value is used. |
| Wi-Fi antennas | 3 internal dual-band PCB antennas; peak gain of 4.0 dBi at 2.4 GHz and 4.0 dBi at 5 GHzValue declared by the manufacturer; applicable configuration and regulatory domain. |
| BLE antenna | 1 internal 2.4 GHz antenna; peak gain of 3.5 dBiValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Bluetooth | BLE 5.2; Bluetooth scanning and iBeacon advertisements; maximum TX power of 10 dBmValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Efficiency features | OFDMA UL/DL; MU-MIMO UL/DL; BSS Coloring; Enhanced Target Wake TimeValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Zero-Wait DFS | Not supportedValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Ethernet ports | 4 × RJ45 10/100/1000BASE-T: 1 802.3at PoE input (PD), 1 802.3af PoE output (PSE), 2 without PoEValue declared by the manufacturer; applicable configuration and regulatory domain. |
|---|---|
| Passthrough and console | 2 × passthrough RJ45 (input/output) + 1 × RJ45 serial RS-232Value declared by the manufacturer; applicable configuration and regulatory domain. |
| USB | USB support declared; disabled when powered by 802.3afValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Power supply | 802.3at PoE; optional SP-FAP23J-PA-10 DC adapterValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Maximum power consumption | 17.5 W without PSE output; 31 W with PSE outputValue declared by the manufacturer; applicable configuration and regulatory domain. |
| DC power-supply mode | Full functionality + USB + 802.3af PSE output of 15.4 WValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Modo com PoE 802.3at | Full functionality + PSE output limited to 7 WValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Modo com PoE 802.3af | Radio functions only; USB and PSE output unavailableValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Recommended injector | GPI-130, 802.3at PoE; purchased separatelyValue declared by the manufacturer; applicable configuration and regulatory domain. |
| MDI/MDIX | SupportedValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Simultaneous SSIDs | Up to 8 per client radio; 7 with background scanningConfiguration limit; does not guarantee usable capacity per client. |
|---|---|
| Clients per radio | Up to 512 on radios 1 and 2Association capacity; performance depends on the application and RF design. |
| SSID modes | Local-Bridge, Tunnel and MeshValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Authentication | WPA, WPA2 and WPA3 with 802.1X or pre-shared key; captive portal; MAC allow/block listsValue declared by the manufacturer; applicable configuration and regulatory domain. |
| EAP methods | EAP-TLS; EAP-TTLS/MSCHAPv2; PEAPv0/EAP-MSCHAPv2; PEAPv1/EAP-GTC; EAP-SIM; EAP-AKA; EAP-FAST; EAP-TTLS/PAPValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Wireless monitoring | Rogue AP scanning and WIDS/WIPS in background or dedicated mode; dedicated mode recommended for WIDS/WIPSValue declared by the manufacturer; applicable configuration and regulatory domain. |
| RF diagnostics | Packet sniffer and spectrum analyserValue declared by the manufacturer; applicable configuration and regulatory domain. |
| UTP on the AP | Not supportedValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Controller and firmware | Compatibility must be validated for the exact FortiAP and FortiOS combinationDo not assume unrestricted support across FortiGate versions or models. |
| Processor and memory | Quad-core ARM Cortex-A53 at 1.6 GHz; 1 GB RAMValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Mobility and networking standards | IEEE 802.11k/r/v/w, 802.1Q and 802.1XValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Form factor | Indoor wall-jack or desktop APValue declared by the manufacturer; applicable configuration and regulatory domain. |
|---|---|
| Mounting | Wall plate; optional FAP-MNT-WJ-20 desktop standValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Dimensions (L × W × H) | 168 × 117 × 28 mmValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Weight | 0.45 kgValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Packaged weight | 0.70 kgValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Operating temperature | 0 °C to 50 °CValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Storage temperature | −30 °C to 70 °CValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Humidity | 10% to 90%, non-condensingValue declared by the manufacturer; applicable configuration and regulatory domain. |
| IP rating | Not applicable in the datasheet; indoor-use modelValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Material plenum UL 2043 | NoValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Integrated surge protection | NoValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Kensington lock | YesValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Declared MTBF | Superior a 10 anosValue declared by the manufacturer; applicable configuration and regulatory domain. |
| RF regulatory approvals | Wi-Fi Alliance, including Passpoint; DFS: FCC, IC, Europe, Japan, Brazil, Taiwan and KoreaValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Regional restrictions | Frequencies, power and communication features are subject to local regulations; select the SKU with the correct regional codeValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Warranty | Limited lifetime warranty declared by the manufacturerValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Optional support | FortiCare Premium: FC-10-P23JF-247-02-DD; FortiCare Elite: FC-10-P23JF-284-02-DDValue declared by the manufacturer; applicable configuration and regulatory domain. |
|---|---|
| FortiCare Essential | FC-10-P23JF-314-02-DD; available only for renewal, not for initial hardware purchaseValue declared by the manufacturer; applicable configuration and regulatory domain. |
| FortiSASE | FC-10-P23JF-595-02-DD: subscription for cloud-managed FortiAP, with included bandwidthValue declared by the manufacturer; applicable configuration and regulatory domain. |
| Hardware SKU | FAP-23JF-[RC]Value declared by the manufacturer; applicable configuration and regulatory domain. |
| FortiOS 8.0.0 — recommended FortiAP firmware | 7.6.5Other versions: consult the matrix. |
|---|---|
| Regulatory domain | Validate the SKU’s regional code, channels, power and regulatory approvalAvailable frequencies and features vary by country, indoor/outdoor mode and firmware. |
Figures published by the manufacturer. Final sizing depends on the environment, enabled services and traffic profile.